Opentrons Flex Gripper

Overview

The Opentrons Flex Gripper enables fully automated labware movement without manual intervention. It moves plates, reservoirs, and tip racks between deck slots, hardware modules, trash/waste chute, and off-deck storage with precise positioning and optional offset adjustments.

Core value: Eliminate manual plate transfers during protocols. Automatically move labware between modules, enabling complex multi-step workflows without pausing for user intervention.

Platform: Opentrons Flex only (not available on OT-2)

When to Use

Use the Gripper skill when:

• Moving labware between deck locations automatically
• Transferring plates between hardware modules (Temperature, Heater-Shaker, Magnetic Block, etc.)
• Loading plates onto Absorbance Reader or Thermocycler
• Disposing labware in waste chute
• Moving labware to/from off-deck storage
• Automating workflows that would otherwise require manual intervention

Don't use when:

• Working with OT-2 robot (gripper is Flex-only)
• Labware is not grippable (lacks compatible geometry/features)
• Manual control is preferred for delicate operations
• Pipette can accomplish the task without moving entire labware

Quick Reference

Operation	Method	Key Parameters
Move labware	protocol.move_labware()	labware, new_location, use_gripper=True
Move with offsets	protocol.move_labware()	pick_up_offset, drop_offset
Move to module	protocol.move_labware()	labware, module_object, use_gripper=True
Dispose in waste	protocol.move_labware()	labware, waste_chute, use_gripper=True
Move off-deck	protocol.move_labware()	labware, OFF_DECK, use_gripper=True
Manual movement	protocol.move_labware()	use_gripper=False (pauses for user)

Platform Requirements

Opentrons Flex only

• API version: 2.15+ (gripper support)
• Robot type: Must specify "robotType": "Flex"

Basic Usage

Moving Between Deck Slots

from opentrons import protocol_api

metadata = {'apiLevel': '2.19'}
requirements = {"robotType": "Flex", "apiLevel": "2.19"}

def run(protocol: protocol_api.ProtocolContext):
    # Load labware
    source_plate = protocol.load_labware("corning_96_wellplate_360ul_flat", "C1")

    # Move labware to new deck slot
    protocol.move_labware(
        labware=source_plate,
        new_location="D2",
        use_gripper=True
    )

Deck slot formats (both work):

• Coordinate format: "A1", "B2", "C3", "D1" (preferred for Flex)
• Numeric format: "1", "2", "3", etc. (OT-2 legacy, still compatible)

Moving to Hardware Module

# Load module and labware
temp_mod = protocol.load_module("temperature module gen2", "D1")
plate = protocol.load_labware("corning_96_wellplate_360ul_flat", "C2")

# Move plate to temperature module
protocol.move_labware(
    labware=plate,
    new_location=temp_mod,
    use_gripper=True
)

Moving to Waste Chute

# Load waste chute
waste_chute = protocol.load_waste_chute()

# Dispose of used plate
protocol.move_labware(
    labware=used_plate,
    new_location=waste_chute,
    use_gripper=True
)

Moving Off-Deck

from opentrons.protocol_api import OFF_DECK

# Move labware off the deck (to storage)
protocol.move_labware(
    labware=archive_plate,
    new_location=OFF_DECK,
    use_gripper=True
)

# Later: bring back from off-deck storage
protocol.move_labware(
    labware=archive_plate,
    new_location="B3",
    use_gripper=True
)

Use case: Free up deck space by temporarily storing labware off-deck

Position Offsets

Fine-tune pickup and drop positions with offset vectors:

Basic Offset Syntax

protocol.move_labware(
    labware=plate,
    new_location="D2",
    use_gripper=True,
    pick_up_offset={"x": 0, "y": 0, "z": 2},  # Lift 2mm higher when picking up
    drop_offset={"x": 0, "y": 0, "z": 1}      # Place 1mm higher when dropping
)

Offset units: Millimeters Coordinates:

• x: Left (-) / Right (+)
• y: Back (-) / Front (+)
• z: Down (-) / Up (+)

When to Use Offsets

Pick-up offset:

• Labware sits higher/lower than expected
• Adapters or custom labware with non-standard height
• Ensure proper gripper engagement

Drop-off offset:

• Ensure proper seating on module or adapter
• Accommodate non-standard landing surfaces
• Avoid collision with deck features

Example with Custom Labware

# Custom deep-well plate requires higher pickup
custom_plate = protocol.load_labware("custom_deepwell_96", "C1")

protocol.move_labware(
    labware=custom_plate,
    new_location="D1",
    use_gripper=True,
    pick_up_offset={"x": 0, "y": 0, "z": 3},  # Pickup 3mm higher
    drop_offset={"x": 0, "y": 0, "z": 0}      # Standard drop
)

Manual Movement Alternative

Set use_gripper=False to pause protocol for user to manually move labware:

# Pause for manual movement
protocol.move_labware(
    labware=delicate_plate,
    new_location="D3",
    use_gripper=False  # Protocol pauses, user moves plate manually
)

Use case: Delicate labware, non-grippable items, or troubleshooting

Module Integration

Temperature Module

temp_mod = protocol.load_module("temperature module gen2", "D1")
plate = protocol.load_labware("corning_96_wellplate_360ul_flat", "C2")

# Move to temperature module
protocol.move_labware(plate, temp_mod, use_gripper=True)

# Set temperature
temp_mod.set_temperature(4)
protocol.delay(minutes=5)

# Move off module
protocol.move_labware(plate, "C2", use_gripper=True)

temp_mod.deactivate()

Heater-Shaker Module

Critical: Open labware latch before gripper operations

hs_mod = protocol.load_module("heaterShakerModuleV1", "D1")
adapter = hs_mod.load_adapter("opentrons_96_flat_bottom_adapter")
plate = protocol.load_labware("corning_96_wellplate_360ul_flat", "C2")

# Open latch BEFORE moving plate to module
hs_mod.open_labware_latch()

# Move plate to heater-shaker
protocol.move_labware(plate, hs_mod, use_gripper=True)

# Close latch for shaking
hs_mod.close_labware_latch()
hs_mod.set_and_wait_for_temperature(37)
hs_mod.set_and_wait_for_shake_speed(500)
protocol.delay(minutes=10)
hs_mod.deactivate_shaker()
hs_mod.deactivate_heater()

# Open latch BEFORE removing plate
hs_mod.open_labware_latch()

# Move plate off module
protocol.move_labware(plate, "C2", use_gripper=True)

Thermocycler Module

Critical: Open lid before gripper operations

tc_mod = protocol.load_module("thermocyclerModuleV2")
plate = protocol.load_labware("opentrons_96_wellplate_200ul_pcr_full_skirt", "C2")

# Open lid BEFORE moving plate to thermocycler
tc_mod.open_lid()

# Move plate to thermocycler
protocol.move_labware(plate, tc_mod, use_gripper=True)

# Close lid and run PCR
tc_mod.close_lid()
tc_mod.set_lid_temperature(105)
# ... PCR cycling ...

# Open lid BEFORE removing plate
tc_mod.open_lid()

# Move plate off thermocycler
protocol.move_labware(plate, "C2", use_gripper=True)

Magnetic Block (Flex)

mag_block = protocol.load_module("magneticBlockV1", "D1")
mag_plate = protocol.load_labware("biorad_96_wellplate_200ul_pcr", "C2")

# Move plate to magnetic block for bead separation
protocol.move_labware(mag_plate, mag_block, use_gripper=True)

# Wait for beads to collect
protocol.delay(minutes=3)

# Pipette supernatant (beads held by magnets)
pipette.transfer(150, mag_plate.wells(), waste.wells())

# Move plate off magnets for resuspension
protocol.move_labware(mag_plate, "C2", use_gripper=True)

Absorbance Plate Reader

Critical: Reader lid must be open before gripper operations

reader = protocol.load_module("absorbanceReaderV1", "D3")
assay_plate = protocol.load_labware("corning_96_wellplate_360ul_flat", "C2")

# Initialize reader
reader.close_lid()
reader.initialize(mode="single", wavelengths=[450])

# Open lid BEFORE moving plate to reader
reader.open_lid()

# Move plate to reader
protocol.move_labware(assay_plate, reader, use_gripper=True)

# Close lid and read
reader.close_lid()
data = reader.read()

# Open lid BEFORE removing plate
reader.open_lid()

# Move plate off reader
protocol.move_labware(assay_plate, "C2", use_gripper=True)

Common Patterns

Multi-Module Workflow

# DNA extraction with module transfers
sample_plate = protocol.load_labware("biorad_96_wellplate_200ul_pcr", "C1")
hs_mod = protocol.load_module("heaterShakerModuleV1", "D1")
mag_block = protocol.load_module("magneticBlockV1", "D2")
temp_mod = protocol.load_module("temperature module gen2", "D3")

# 1. Lysis on heater-shaker
hs_mod.open_labware_latch()
protocol.move_labware(sample_plate, hs_mod, use_gripper=True)
hs_mod.close_labware_latch()
hs_mod.set_and_wait_for_temperature(56)
hs_mod.set_and_wait_for_shake_speed(1000)
protocol.delay(minutes=15)
hs_mod.deactivate_shaker()
hs_mod.deactivate_heater()
hs_mod.open_labware_latch()

# 2. Bead binding on magnetic block
protocol.move_labware(sample_plate, mag_block, use_gripper=True)
protocol.delay(minutes=3)
pipette.transfer(150, sample_plate.wells(), waste.wells())

# 3. Elution on temperature module (cold)
protocol.move_labware(sample_plate, temp_mod, use_gripper=True)
temp_mod.set_temperature(4)
pipette.transfer(50, elution_buffer, sample_plate.wells())

# 4. Return to deck
protocol.move_labware(sample_plate, "C1", use_gripper=True)
temp_mod.deactivate()

Plate Stacking Workflow

# Process multiple plates sequentially
plates = [
    protocol.load_labware("corning_96_wellplate_360ul_flat", "C1"),
    protocol.load_labware("corning_96_wellplate_360ul_flat", "C2"),
    protocol.load_labware("corning_96_wellplate_360ul_flat", "C3")
]

reader = protocol.load_module("absorbanceReaderV1", "D3")
reader.close_lid()
reader.initialize(mode="single", wavelengths=[600])
reader.open_lid()

for i, plate in enumerate(plates):
    # Read each plate
    protocol.move_labware(plate, reader, use_gripper=True)
    reader.close_lid()
    data = reader.read(export_filename=f"plate_{i+1}_od600")
    reader.open_lid()

    # Move to off-deck storage
    protocol.move_labware(plate, OFF_DECK, use_gripper=True)

Waste Management

# Dispose of used consumables
waste_chute = protocol.load_waste_chute()

# After using tip rack
protocol.move_labware(empty_tips, waste_chute, use_gripper=True)

# After processing sample plate
protocol.move_labware(used_plate, waste_chute, use_gripper=True)

Dynamic Deck Space Management

# Free up deck space by moving inactive labware off-deck
storage = OFF_DECK

# Initial setup - plates start on deck
plate_1 = protocol.load_labware("corning_96_wellplate_360ul_flat", "B1")
plate_2 = protocol.load_labware("corning_96_wellplate_360ul_flat", "B2")
plate_3 = protocol.load_labware("corning_96_wellplate_360ul_flat", "B3")

# Process plate 1
# ... operations on plate_1 ...

# Move plate 1 off-deck to free space
protocol.move_labware(plate_1, storage, use_gripper=True)

# Process plate 2
# ... operations on plate_2 ...

# Retrieve plate 1 when needed again
protocol.move_labware(plate_1, "B1", use_gripper=True)

Grippable Labware

The gripper can only move labware with compatible geometry.

Compatible Features

Labware must have one of:

• Gripper-compatible rim - Extended lip or ridge for gripper jaws
• Side grips - Indentations or features on sides
• Opentrons-certified labware - Verified gripper compatibility

Checking Compatibility

Most Opentrons labware and major brands (Corning, NEST, Axygen, Bio-Rad) are gripper-compatible. Check labware definition or test before protocol deployment.

Non-Grippable Labware

Examples of labware that may NOT be grippable:

• Very small tubes or vials without grip features
• Irregularly shaped containers
• Custom labware without gripper considerations
• Delicate or fragile items

Solution: Use use_gripper=False to prompt manual movement, or use adapters.

Best Practices

1. Open module lids/latches before gripper movement - Required for Heater-Shaker, Thermocycler, Absorbance Reader
2. Use descriptive variable names - Track labware clearly through movements
3. Test with simulation first - Verify gripper movements before running on hardware
4. Add protocol comments - Document why labware is being moved
5. Plan deck layout - Minimize unnecessary movements, optimize for efficiency
6. Use OFF_DECK strategically - Free up deck space for complex protocols
7. Check labware compatibility - Ensure labware is grippable before deploying
8. Use offsets judiciously - Only when necessary for proper positioning
9. Consider manual fallback - Have use_gripper=False backup for troubleshooting
10. Dispose properly - Use waste chute for used consumables to maintain workspace

Common Mistakes

❌ Moving to Heater-Shaker with closed latch:

protocol.move_labware(plate, hs_mod, use_gripper=True)  # Error: latch closed

✅ Correct:

hs_mod.open_labware_latch()
protocol.move_labware(plate, hs_mod, use_gripper=True)

❌ Moving to Thermocycler with closed lid:

protocol.move_labware(plate, tc_mod, use_gripper=True)  # Error: lid closed

✅ Correct:

tc_mod.open_lid()
protocol.move_labware(plate, tc_mod, use_gripper=True)

❌ Moving non-grippable labware:

# Custom labware without gripper features
protocol.move_labware(custom_tubes, "D2", use_gripper=True)  # Error: cannot grip

✅ Correct:

# Use manual movement for non-grippable labware
protocol.move_labware(custom_tubes, "D2", use_gripper=False)

❌ Forgetting to specify use_gripper:

protocol.move_labware(plate, "D2")  # Defaults to use_gripper=False, pauses protocol

✅ Correct:

protocol.move_labware(plate, "D2", use_gripper=True)  # Explicit gripper use

❌ Moving to occupied location:

plate_1 = protocol.load_labware("corning_96_wellplate_360ul_flat", "C1")
plate_2 = protocol.load_labware("corning_96_wellplate_360ul_flat", "C2")
protocol.move_labware(plate_1, "C2", use_gripper=True)  # Error: C2 occupied by plate_2

✅ Correct:

# Move plate_2 first, then plate_1
protocol.move_labware(plate_2, OFF_DECK, use_gripper=True)
protocol.move_labware(plate_1, "C2", use_gripper=True)

Troubleshooting

Gripper cannot grip labware:

• Verify labware has gripper-compatible features
• Check labware is properly seated on deck/module
• Try adjusting pick_up_offset (increase z)
• Use use_gripper=False for non-compatible labware

Gripper collision errors:

• Ensure module lids are open (Thermocycler, Absorbance Reader)
• Verify Heater-Shaker latch is open
• Check deck layout for obstructions
• Confirm destination location is clear

Labware not properly seated after movement:

• Adjust drop_offset to ensure proper placement
• Check module/adapter compatibility with labware
• Verify destination surface is level and clear

Protocol pauses unexpectedly:

• Check that use_gripper=True is specified
• Verify gripper is enabled for protocol
• Ensure labware is grippable

OFF_DECK movement errors:

• Import OFF_DECK constant: from opentrons.protocol_api import OFF_DECK
• Track labware location - cannot move from OFF_DECK if not there
• Ensure sufficient off-deck storage slots

Advanced Techniques

Conditional Gripper Use

# Use gripper for standard labware, manual for custom
def move_smart(protocol, labware, destination, is_grippable=True):
    if is_grippable:
        protocol.move_labware(labware, destination, use_gripper=True)
    else:
        protocol.comment(f"Please manually move {labware} to {destination}")
        protocol.move_labware(labware, destination, use_gripper=False)

move_smart(protocol, standard_plate, "D2", is_grippable=True)
move_smart(protocol, custom_tubes, "D3", is_grippable=False)

Offset Calibration Helper

# Test offsets to find optimal values
def test_gripper_offset(protocol, labware, destination, z_offset_range):
    for z in z_offset_range:
        protocol.comment(f"Testing pickup offset z={z}")
        protocol.move_labware(
            labware,
            destination,
            use_gripper=True,
            pick_up_offset={"x": 0, "y": 0, "z": z}
        )
        protocol.pause("Check if pickup was successful. Resume to continue.")
        # Move back
        protocol.move_labware(labware, "C1", use_gripper=True)

# Run test
test_gripper_offset(protocol, test_plate, "D2", z_offset_range=[0, 1, 2, 3])

Plate Carousel Pattern

# Rotate plates through processing stations
def process_plate_carousel(protocol, plates, processing_station):
    """Process multiple plates through single module."""
    for i, plate in enumerate(plates):
        protocol.comment(f"Processing plate {i+1}/{len(plates)}")

        # Move to processing station
        protocol.move_labware(plate, processing_station, use_gripper=True)

        # Process (example: read absorbance)
        # ... processing steps ...

        # Move to archive
        protocol.move_labware(plate, OFF_DECK, use_gripper=True)

process_plate_carousel(protocol, [plate1, plate2, plate3], reader_module)

Deck Layout Planning

Tips for efficient gripper workflows:

1. Keep high-traffic locations accessible - Place frequently moved labware in central deck positions
2. Group modules logically - Arrange modules in workflow order to minimize travel distance
3. Reserve column 4 for Absorbance Reader - If using reader, entire column 4 is staging area
4. Use OFF_DECK for storage - Free up deck space for active labware
5. Plan waste chute access - Ensure gripper can reach waste chute without obstacles

Example efficient layout:

     1          2          3          4
A  [Plates]  [Module1]  [Reader]  [Reserved]
B  [Plates]  [Module2]  [Reader]  [Reserved]
C  [Tips]    [Reagent]  [Reader]  [Reserved]
D  [Tips]    [Waste]    [Reader]  [Reserved]

Integration with Staging Area Slots

Flex staging area slots (column 4: A4, B4, C4, D4) are used for:

• Absorbance Reader lid storage (automatic)
• Temporary labware holding
• Gripper intermediate positions

Important: When Absorbance Reader is loaded, column 4 cannot be used for labware.

API Version Requirements

• Minimum API version: 2.15 (gripper support introduced)
• Recommended: 2.19+ for full feature support
• Robot type: Must be Opentrons Flex

Additional Resources

• Gripper Documentation: https://docs.opentrons.com/v2/new_protocol_api.html#protocol_api.ProtocolContext.move_labware
• Labware Library: https://labware.opentrons.com/ (check gripper compatibility)
• Opentrons Support: https://support.opentrons.com/

Related Skills

• opentrons - Main Opentrons Python API skill
• opentrons-heater-shaker - Heater-Shaker Module (requires gripper integration)
• opentrons-absorbance-reader - Absorbance Plate Reader (requires gripper)
• opentrons-magnetic-block - Magnetic Block (designed for gripper workflow)
• opentrons-thermocycler - Thermocycler Module (gripper-compatible)
• opentrons-temperature-module - Temperature Module (gripper-compatible)